Save Money with Sealless Combination Tool FROMM A383

 Armed with a host of advanced features, the Fromm A383 pneumatic tool is undoubtedly a better version than A380 or A335 tools. Immediately after its introduction, this tool has been able to acquire a prominent position in the local and global markets. Factories or warehouses where workload is heavy and the strapping happens over shifts have particularly benefited from this pneumatic tool. The 383 tool is widely used in construction or metal processing industries.

Specific features and advantages of A383:

• Uniflex and Ultraflex strapping up to 1100 N/mm²

• Steel strapping of 19.0 – 32.0 mm width and thickness of 0.63 – 1.30 mm.
• Weight of the machine is 52 lbs without suspension and 53 lbs with suspension
• Sealless MicroLock System that assures up to 80% seal strength.
• Two different tension versions available i.e. 10000N and 15000N

Users have the flexibility to choose automatic or semi-auto mode of operation. Considering the tool’s extreme weight, users are advised to use suspension brackets as precautionary measure. This pneumatic sealless tool guarantees maximum joint security against unlocking. And of course, you can’t overlook the significant amount that you will save by shifting away from metal seals.

How to safely operate FROMM A383

• First you need to feed the strap by holding it tightly with the left hand and then pulling it towards you with the right hand
• Load the strap by lifting the flapper valve lever and then release the lever
• The next step is tensioning the strap till the motor stalls
• Press and hold down the sealing lever till the strap is cut off
• Finally remove the tool from the tensioned strap

It is always advisable to use hand gloves and necessary eye protection while operating any strapping tool. Allstrap is a reliable supplier of FROMM tools and offers in-depth information about FROMM A383, its features, advantages and operation techniques.